TREX 450 SA
Three Spektrum S75 Servos, one Hitec HS-65HB servo for tail rotor, Hacker X30 PRO Speed control, Hacker A20-6XL brushless motor, Align RCE-500X Gyro and a Spektrum A6000 six channel receiver currently using a Spektrum DX6 Transmitter

Wild Thing
OS 20 FP engine, four Futaba S3101 Servos, four ounce Kraft-Hayes fuel tank, APC 8X6 prop, first plane I ever built from scratch

Funtana 40S
from Hangar 9 powered by a OS 50 XX if flew great but a bearing went bad so I changed it to a Saito 82 with no lack of power, Futaba servos, receiver and 9CAP transmitter
A midair retired it to the dump

E-Flite Mini Funtana
HiMax 2025-4200 brushless in-runner, Brute 6.6 to 1 gearbox, Cool Running A-25  25 Amp ESC, Thunder Power 2100 mah Li-Po battery, 12X6 APC Slow Flyer prop, HiTec Electron 6 receiver and 4 E-Flite EFLRS75 servos using a Futaba 9CAP transmitter

Extreme Flight Extra 300 EX
Torque 2818-900 Brushless Out-Runner, Airboss 35 Amp ESC, Thunder Power 2100 mah Li-Po battery, APC 11X5.5E prop, Dubro 2 inch Spinner, HiTec Electron 6 receiver and 4 HiTec HS-65HB servos using a Futaba 9CAP transmitter.

DB Bibe
Don Baisden's design of the Ultimate Bi-Plane made from 1 sheet of 6 MM Depron foam, Jeti AC28/10-13 brushless Out-Runner, Jeti 30 Amp ESC, Thunder Power 2100 MAH Li-PO Battery, APC 11X4.7SF prop, Using the Spektrum DX6 transmitter, Spektrum AR6000 receiver and 4 Spektrum S75 servos. Get ready to have some fun.

Hangar 9 FuntanaX 100
Saito 125 4-stroke, Zinger 16X5 wood prop, Tru Turn 2.5 inch spinner, Sanyo 6 volt 600 MAH battery pack, 5 Futaba S3010 servos and one Futaba FP-S132H servo for throttle, Futaba FP-R129DP receiver and using a Futaba 9CAP transmitter

Ohio Model Products 52 inch Fusion X3D
Saito 82 4-stroke, Picture shows an APC 14X4W prop but I am now using a Zinger 14X4 wood prop, Dubro 2.25 inch spinner, Sanyo 4.8 volt 600 Mah battery pack, Futaba FP-R117H receiver, one Futaba S3101 servo for throttle, two Futaba S3003 servos for the Ailerons, two Futaba S3001 servos for Rudder and Elevator and using a Futaba 9CAP transmitter

The World Models Sky Raider Mach II
Powered by an OS LA 40 2 stroke for use in the Club 40 Pylon Racing Circuit in North Central Florida. Using a (I won't tell the brand or size) black prop, The plane is absolutely stock out of the box except for one change and that was I used a Sullivan 6 oz round fuel tank, The covering was changed because the right wing covering came off in flight during a race. I did manage to finish the race and land with the covering gone. I did not win but I finished the race. The engine is right out of the box and the baffle is still in the muffler. I am using all Futaba electronics four S148 servos, Sanyo 4.8 volt 600 MAH battery pack, FP-R128DP receiver and using a FP-T5UAP transmitter.
Love it!!

Protech Extra 300L Foam
HiMax 2808-0980 brushless Out-Runner, Cool Running 25 Amp ESC, APC 11X4.7SF prop, four GWS Pico Std servos, HiTec Electron 6 receiver and using a Futaba 9CAP transmitter

Carl Goldberg Husky 400
Currently no power or electronics. It is all in the Protech 300L